ВИЛКИ
ENVY
MATERIAL: full liquid post heat-treatment on 4130 “M2“ crmo
MACHINING: fully cnc’d steerer, single butted
fork design requires no bearing runner on crown
only works with internal headsets
STEERER LENGTH: 170mm
OFFSET: 33mm
DROPOUTS: lasercut, 5mm, 4130 crmo, heat-treated, spherical formed bottom on leg
available in 3/8''(10mm)
TOPBOLT: highest quality 7075-T6 alloy topbolt plus washer
OTHER: with or w/o u-brake pivots available
WEIGHT: 975 g (34.39 oz : 2.14 lbs) (w/o topbolt)
topbolt: 23 g (0.81 oz : 0.05 lbs)
SCORPIO - интересная вилка, существует уже не первый год, интересна своими дропаутами.
MATERIAL: full liquid post heat-treatment on 4130 “M2“ crmo
MACHINING: fully cnc’d steerer, single butted
fork design requires no bearing runner on crown
only works with internal headsets
light tapered blades
STEERER LENGTH: 170mm
OFFSET: 33mm
DROPOUTS: fully invest cast dropout and end cap as one
4130 crmo, heat-treated. available in 3/8''(10mm)
TOPBOLT: highest quality 7075-T6 alloy topbolt plus washer
OTHER: with or w/o u-brake pivots available
WEIGHT: 950g (33.51oz : 2.09lbs) (w/o topbolt)
topbolt: 23 g (0.81oz : 0.05lbs)
PATRON 25 и 35 - соответсвенно в двух вариантов offset-а - 25 и 35 мм
MATERIAL: full liquid post heat-treatment on 4130 “M2“ crmo
MACHINING: fully cnc’d steerer, single butted
fork design requires no bearing runner on crown
only works with internal headsets
STEERER LENGTH: 170mm
DROPOUTS: 7mm, full investment casted, 4130 crmo, heat-treated
hollow construction
available in 3/8''(10mm)
TOPBOLT: highest quality 7075-T6 alloy topbolt plus washer
OTHER: with or w/o u-brake pivots available
PATRON 25: 929 g (32.76 oz : 2.04 lbs) (w/o topbolt)
PATRON 35: 945 g (33.33 oz : 2.08 lbs) (w/o topbolt)
topbolt: 23 g (0.81oz : 0.05lbs)
C.R.E.A.M - интересная новинка
MATERIAL: full liquid post heat-treatment on 4130 “M2“ crmo
MACHINING: fully cnc’d steerer, single butted
fork design requires no bearing runner on crown
only works with internal headsets
STEERER LENGTH: 170mm
OFFSET: 30mm
DROPOUTS: investment casted, 6mm, 4130 crmo, heat-treated
available in 3/8''(10mm)
not suited for peg use
TOPBOLT: highest quality 7075-T6 alloy topbolt plus washer
OTHER: only w/o u-brake pivots available
WEIGHT: 911g (32.13oz : 2.00lbs) (w/o topbolt)
topbolt: 23 g (0.81oz : 0.05lbs)
РУЛЕВАЯ КОЛОНКА - в 2012 году получила новый дизайн, теперь крышка более округлая.
